Fire Safety Stick for Industrial & Plant
Designed for fires that start inside machinery and confined spaces, the Fire Safety Stick gives industrial sites fast, effective suppression without downtime, contamination, or ongoing servicing costs.
Why your Plant Operation needs Fire Safety Stick
Plants, factories, recycling centres and industrial sites are adding the Fire Safety Stick because it can reach fires inside machinery, confined spaces and compacted materials where traditional extinguishers are ineffective. Its simple operation, broad fire capability, and lack of annual servicing make it a practical, cost-effective addition to modern industrial fire safety strategies. Implement it in the following examples:
Protect Your Operation Critical Machinery
Mobile Fire Security For Equipment & Forklifts
Transform Safety For Your Vehicle Fleet
Your Operational Fire Risks & Extinguisher Problems
-
Fires starting in inaccessible locations
Ignition often occurs inside machinery, conveyors, balers, electrical cabinets, or compacted material, where fires cannot be seen or reached quickly.
-
Unpredictable ignition sources
Lithium batteries, aerosols, pressurised containers, friction, overheating components, and electrical faults introduce multiple, hard-to-control fire risks.
-
Rapid escalation before intervention
Fires can develop internally and intensify before operators are aware, reducing the window for effective early response.
-
Traditional extinguishers require direct line of sight
Water, foam, and powder extinguishers are designed for open flames and are ineffective when fires are enclosed or shielded.
-
Equipment damage and contamination from extinguishers
Powder and foam can damage motors, electrics, hydraulics, and sensors, leading to additional downtime and repair costs.
-
Operational downtime and production loss
Even small fire incidents can trigger shutdowns, clean-ups, inspections, and delayed restarts across entire lines or facilities.
-
Heavy, complex, or slow-to-use equipment
Standard extinguishers are bulky, require training, and can be difficult to deploy quickly under pressure.
-
High ongoing servicing and compliance costs
Annual inspections, pressure testing, refills, replacements, and third-party servicing contracts create recurring expenses and site disruption.
-
Increasing insurance and regulatory pressure
Insurers and regulators demand stronger controls, documented mitigation, and reduced incident frequency, raising both risk exposure and compliance burden.
Our Solution is the Fire Safety Stick
-
No Annual Servicing
Just a simple visual in-house inspection
-
Multi-purpose
Certified for A/B/C/F & Electrical fires
-
No Corrosive Mess
Safe for machinery & electrics
-
Easy to Use
Quick deployment when needed
-
Compact & Lightweight
Weighs from 215g
-
15 Year Shelf Life
Less replacements, less costs
-
Long Discharge Time
50 or 100 seconds
-
Safe to Breathe
Non-toxic discharge
-
Eco-Friendly
Recyclable & PFAS Free
The Fire Safety Stick tackles the key fire risks in industrial environments by reaching fires inside machinery, compacted material, and confined spaces where traditional extinguishers struggle.
It’s clean, residue-free vapour enables fast early intervention without damaging equipment or causing additional downtime, while simple activation allows operators to respond quickly under pressure. With no annual servicing, it also reduces ongoing compliance costs while strengthening real-world fire protection.
How we have already helped
Monoworld Recycling Group
What They Do
Monoworld is a large UK-based recycling and waste management company specialising in the collection, processing, and recycling of target materials. The business operates high-volume industrial recycling facilities, using balers, conveyors, and heavy machinery to process material streams for reuse within the circular economy.
National Fire Incident
Following a serious fire incident at one of its recycling facilities, Monoworld experienced first-hand how quickly a small ignition can escalate in a high-throughput industrial environment. The fire, believed to be caused by hazardous materials such as lithium batteries concealed within the waste stream, ignited inside processing equipment where detection was difficult, and access was restricted.
Although the incident was ultimately brought under control, it resulted in significant disruption, highlighted vulnerabilities in relying solely on traditional fire extinguishers, and drew wider industry attention to the growing fire risk within recycling operations. The event acted as a catalyst for Monoworld to reassess its fire safety strategy, with a clear focus on earlier intervention, improved protection inside machinery, and reducing the likelihood of repeat incidents.
Their Problems
Monoworld encounters several key fire safety challenges across its operations, each linked to how and where fires actually start in industrial recycling environments.
Balers & Processing Machinery
Fires often ignite deep inside compacted bales or enclosed machinery where heat builds unnoticed. These ignition points are inaccessible to traditional extinguishers, allowing small fires to escalate and force costly shutdowns.
Forklifts & Mobile Plant
Forklifts operate closest to high-risk areas but are typically equipped with heavy, slow-to-use extinguishers. Powder-based units can also damage engines and electrics, reducing operator confidence to act quickly.
Operational & Cost Pressures
Annual servicing, inspections, and extinguisher replacements create ongoing costs and site disruption. Despite this investment, traditional equipment still offers limited protection against fires starting in confined or hidden spaces.
The Solution
As an additional layer of fire protection, the Fire Safety Stick addresses the specific gaps seen across balers, machinery, forklifts, and day-to-day operations.
Balers & Processing Machinery
-
Vapour penetrates compacted materials and enclosed machinery
-
Reaches hidden ignition points behind guards and panels
-
Enables early intervention before fires escalate and cause shutdowns
Forklifts & Mobile Plant
-
Lightweight and easy to mount on vehicles
-
One-step activation for rapid response
-
Works at any angle in confined or awkward positions
-
Clean discharge with no damage to engines or electrics
Operational & Cost Benefits
-
No annual servicing or inspection requirements
-
No refilling or pressure checks
-
Simple in-house visual checks
-
Reduces ongoing fire safety costs and operational disruption
“A really compact bit of kit that gives our team a quick way to tackle a fire straight away, without getting in the way of day-to-day operations.”
– Mark Impy, Director of Health & Safety, Monoworld
Watch our visit to Monoworld
Hear it directly from a site operations manager at Monoworld in Rushden!
They treated us to a walkaround of their plant, with a focus on the machinery and processors that deal with mixed materials that could at any time become a fire risk. The video also comprehensively covers why the Fire Safety Stick is a perfect solution for this industry and how it will transform not just fire safety but also operationally.
Call us:
(+44) 1582 879529
Open times: 9am – 5pm (Mon-Fri not including bank holidays)
Client Testimonials
